The HP DCP -150C is a round multifunction device, with a copier, scanner, and color printer. The DCP-150C will also come bundled with photo editing software to help enhance your photos before printing. The device includes everything you need to configure this, such as ink cartridges, cables, along with an installation CD-ROM. After placing the ink and paper cartridges in the device, connecting the essential cables and settings to choose from, the DCP-150C is set up and ready to go.
Step
- Remove the plastic wrap and protective tape covering the device, then remove the ink cartridge bag so it does not stick to the spout of the paper tray.
- Slide-out the paper tray of this device and lift up the newspaper cover. Squeeze the side extension and paper guides and slide them to correct the dimensions of this sheet of paper that you would like to use. Make sure the paper is stacked evenly to avoid jams or misprints.
- Add about 100 sheets of paper to the tray. Attach the paper guides, if necessary, then close the tray cover and slide the paper into the system. Open the paper support flap on the front of the machine.
- Plug the included power cord into the device and then into a power source. The device turns on automatically. Press the “OK” button on the device, then use the arrows to choose a language. Press the “Up” arrow to validate your choice.
- Open the ink cartridge cover, located on the ideal side at the front of the machine. Lower the release levers and remove the yellow protective part inside. Simply remove the ink cartridge from its packaging and remove the protective cap from the surface.
- Slide the ink cartridge to the corresponding color slot, With the arrow decal pointing away from you. Lift the lock release levers and press down them till you hear a click. Close to the ink cartridge cap.
- Press”Color Start” to carry out an excellent check. The sheet Will be printed with black and colored ink. In case the quality and color are satisfactory, press”Yes” on three occasions. Press”Yes” if you would like to clean the print head.
- Press”Menu”, then”Initial Installation” and”LCD Contrast”. Use The arrows to adjust the brightness of the display. Return to the previous menu and then choose”Time and Date”. Use the arrows to place the current time and date.
- Insert the setup CD-ROM to the pc. Click “Install MFL -Pro Suite.” The setup occurs automatically. Click”Yes” two, then”Next”. Connect the USB cable into the device, then into the pc. Restart your computer and the setup is now complete.
Once your printer is properly installed, you should start the Printing procedure by incorporating a heap of A4 size paper. If the printer prints, then, it had been set up, and if you happen across any matter with HP Printer Paper Jam, then there was an 0xc18a0206 issue with the installation. If you’re able to determine the issue, then that is great, otherwise, seek the assistance of specialists.
If You’re facing any problems regarding HP Printer Drum Error Then you may contact us for assistance.
About The Author
